RTX 3080 TI HiveOS Ethereum Mining Settings
RTX 3080 TI Ethereum Mining Overclock Settings HiveOS
Use affiliate code SOAT at checkout to support the channel
Amazon:
HiveOS:
Trezor:
Cryptocom:
CashApp:
PrimeXBT: sonofatech.com/primexbt
Parallel Miner:
Coinbase:
SimpleMiningOS:
Use affiliate code SOAT at checkout to support the channel http://gamersupps.gg?afmc=SOAT
u talking too much bro …
rooney?
have you had lazer eye surgery?
There are some videos about to change 3080ti vbios with 3090 and upgrades hashrate to 110mh. Is it possible to make 1 video about this we will appreciated that 🙏😊
Hi Son of a Tech! what PSU are you powering up your Rig ? Do you think with a 750 or 850W can handle 2 GPU 3080 Ti LHR ? to add into equation, the CPU will be a low intel celeron tdp 30w and mobo at most 50w. One module of ram and a pendrive and two Risers. For sure I will run the rig with HiveOS. Thanks
Thank you so much bro very helpful!!!
hey bro i got ftw3 geforce rtx3080 and i have only 55 to 58 mhs overclock with -502 core 3600mhz 80% van
4:36,-300,2400,305
I appreciated this video a lot after my LHR 3060 randomly started hashing right at 50 mh. Even after a couple reboots. Then on the next reboot it was back to semi-unlocked.
Anyone have low memory temperatures ??
Mine are around 92 to 108 °C
Hi, I have a galaxy rtx3080ti with some weird question. I set the core clock and lock on 1400mhz and set mem on 3000mhz on hiveos. But so weird that the nbminer shows the core clock of this RTX3080ti is only 975mhz and hash rate only 81mh. Does anyone have the same problem?
What is the deal with B550 motherboards? I have one and always giving me headaches
hi i have two 3080 ti FE that is giving 50-60mh on my eth hiveos. i tried almost very settings, any help ?
What temps do your vram run though?
hello any good settings for the Palit rtx 3080 Ti ?? I am with windows using G mining: Msi afterburn setup. C C: + 200 M C: +1100 P L: 70 Fan Speed: 75, any other recommendations ??
Planning to solar up my two rigs soon. It's expensive but my house can run on the same system and takes way less power than my mining rigs.
Having a hard time with my 3080ti FE. Load average goes up, pulls all my other cards hash rate down, and it doesn't even mine itself. Just sits there. Have changed everything, reflashed hive, etc
At a loss.
What's a good temperature Mines bouncing between 100c-104c and I'm getting about 90mh/s is that to hot should I make some changes??
man the non LHR cards are just so painless compared to this 102mh 218w pure low the 3080
hey great video, can i ask if any of your gpu have been damaged for using high memory overclock over a long period of time? i have a rtx 3080 that can go up to +1600 mem oc on windows, but im afraid i may damage it by running it at that high memory overclock 24/7
Is it possible to zoom in on the HiveOS window? Impossible to see on a cell phone.
What is the best you've got on a 3080ti using trex and hiveos. I have a brand new 3080ti Founders edition and cant get more than 61mh/s : -400core 2000mem 220Power
I've had some killer luck lately with HiveOS newest update and T-REX Miner's newest V0.25.4 (I think). I get about 89.5 MH/s after about 1-hr of run time or so. It might be better to start just using all LHR cards on a divided mining rig though and mine FIRO or FLUX and ETH with NON-LHR.
evga geforce rtx 3080 ti ftw3 ultra solo me da 20 mh/s aque se deba?.
I confirm everything you said, worked perfectly, awesome job.
check your fb son 😉 message me back bud
Well my EVGA 3090 xc3 ultra do 105mh at 270 watts ( +100 core, +100 mem, PL 77%, fan speed at 90% ) Core temp at 52c, mem temp at 94- 98c. I change the termalPad , i drop 10c, but cooler design of this gpu is the worst of all cooler from the 3090.
I was mining on HiveOS for about a month, noticed a considerable share decrease from mining on windows. Installed windows again, share/min back to expected. HiveOS seems a bit fishy. Also they limit you on using miner API… Not a very good experience overall. I really wanted to use it, but when it appears that they steal some of my submitted shares…that's when the love ends.
Thanks for your content. Did u have to add any config settings in the flight sheet
It is my graphic card model RTX3080 TI
I want to connect it to the power supply
The model of power supply is GREAT WALL 1650
This power supply has both PCIE and Sata port.
I connected directly the PCIE to the graphic card .
My question is which cable to use to connect the riser to power supply : Directly to power supply by this cable 8-pin PCIE (6 + 2) or directly by SATA cable from power supply ?
Pictures or not true
89 mhs -200 +1299 72 power with my FTW3 on windows using NBminer 39.7
Just set mine 3080ti, core 1370 meme 2600 and pl 288 and it produces cool 87.8Mh at 276w ( by hiveos screen )
i was able to get my Zoltac 3080ti to 88.22mh @ core 1200 mem 2500. PL256w
Stupid bloger, on phone not see parameters
Son try 1060 core, will decrease temp and wattage
MY zotac 3080ti went from 84msh to 88.24mhs with ur settings cheers
Thanks for the section on memory overclock. Before upgrading, my 3080s were stable at 2800, now can't seem to push past 2400 without intermittent hangs, but still getting that extra 3% from the NB unlock.
86.1 MHs At 240w using lolMiner on Hive. Core: 1150, Mem: 2900, no power setting, fan at 90%
3-5 more MHs isn’t worth the extra wattage imo.
Stable for a couple months now! (EVGA 3080 Ti FTW)
finally got my 3080ti FE , but with the latest nbminer and nvidia driver im stuck with ~75 Mh/s. Anyone can help a brother out?
I have a Gigabyte 3080ti and I can't get past 60 mg, what Nvidia driver is recommended?
my evga 3080ti jumps around 55-61mh/s but my zotac is pegged at 88mh/s same settings on both. Any ideas? latest nbminer and Nvidia drivers
My 3080ti doesn’t like anything above 42 MH regardless of miner, clock etc. I do get 51 mh on Phoenix miner for some reason but it just won’t get “unlocked” on any of the other ones.